Precautions For Using Walk Behind Road During Running-In Period
Walk Behind Road is a special vehicle in construction machinery. The operator should receive the training and guidance of Shantui manufacturer, have a full understanding of the structure and performance of the loader, and obtain certain operation and maintenance experience to operate the loader. The Operation and Maintenance Manual of Loader provided by Shantui manufacturer is the necessary information for operators to operate the Shantui loader. Before operating the Walk Behind Road, you must read the Operation and Maintenance Manual of Loader and carry out operation and maintenance as required.
Pay attention to the working load during the running-in period of Walk Behind Road. Half of the working load during the running-in period should not exceed 70% of the rated working load, and appropriate workload should be arranged to prevent the occurrence of overheating on the site caused by the continuous operation of the loader for a long time, causing abnormal wear of various components.
Pay attention to observe the indication of each instrument of the loader frequently. In case of any abnormality, stop the machine in time to eliminate it. Stop the operation before the cause is not found and the fault is not eliminated.
Pay attention to check the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) frequently, and pay attention to check the sealing of the whole machine. During the inspection, it is found that there is too much lack of oil and water, and the cause shall be analyzed. At the same time, the lubrication of each lubricating point should be strengthened. It is recommended that the lubricating point of the loader should be filled with grease every day during the running-in period (except for special requirements).
Keep the Walk Behind Road clean, adjust and tighten the loose parts in time to prevent the wear of parts or loss of parts due to looseness.
At the end of the running-in period of Walk Behind Road, the loader shall be subject to compulsory maintenance, inspection and adjustment, and attention shall be paid to the replacement of oil. It is recommended to replace the special oil specified by the manufacturer.
In short, the requirements for the use and maintenance of Walk Behind Road during the running-in period can be summarized as follows: strengthen the operation, maintain various training, reduce the load operation, pay attention to check the working condition of all parts, and strengthen the lubrication of all parts. As long as attention is paid to and the running-in maintenance of the loader is carried out as required, the occurrence of early failures will be reduced, the service life will be extended, the operation efficiency will be improved, and the equipment will bring more benefits to you.