During the work of the backhoe loader, it is inevitable that there will be such and other failures. Today, I will mainly introduce to you how we can do when we cannot correctly determine where the failure is?

Failure To Correctly Judge And Analyze The Failure Of The Backhoe Loader, Blindly Dismantled And Unloaded Is Commonplace

Some maintenance personnel were not clear about the structure and principle of the backhoe loader, did not carefully analyze the cause of the failure, and could not accurately determine the fault location. They blindly dismantled and unloaded the machinery based on the idea of "approximately, almost". As a result, not only the original fault was not eliminated, Moreover, due to poor maintenance skills and craftsmanship, the backhoe loader may have new problems.

Some maintenance personnel were not clear about the structure and principle of the backhoe loader, did not carefully analyze the cause of the failure, and could not accurately determine the fault location. They blindly dismantled and unloaded the machinery based on the idea of "approximately, almost". As a result, not only the original fault was not eliminated, Moreover, due to poor maintenance skills and craftsmanship, the backhoe loader may have new problems.

When the backhoe loader breaks down, the backhoe loader must be tested by the testing equipment. If there is no testing equipment, the traditional fault judgment methods and means such as "ask, see, check and test" can be used, combined with the structure and structure of the construction machinery. Working principle, determine the most likely part of the failure.

When determining the failure of the backhoe loader, the "removal method" and "comparative method" are generally used, and proceed in the order from simple to complex, appearance first, interior first, assembly first, and then parts. Unload".