Choose The Right Walk Behind Road According To The Environment
The walk behind road roller should be selected according to the environment to facilitate our use. Now the editor of the walk behind road roller will show you a selection.
1. Choose according to the specific requirements of the project. Some projects do not have such high compaction requirements in the field. Some require compact ground compaction. Some require the road surface to be very flat, and some require the road surface to be simply suppressed. The selection of small walk behind road rollers for different projects is naturally different, so before choosing a walk behind road roller, you should understand the requirements of the project.
2. Choose according to pavement material. Some pavements are compacted with stones, some pavements are compacted with asphalt, and some pavements are only compacted with some soil. There are big differences between these compacted objects, so the demand for walk behind road rollers is not the same, so pay attention to this when choosing.
3. The transmission of the compressor is cleaned at least once at a time. When it is in a warm-up state, when the oil is released on the side of the transmission of the vehicle, the oil cap returns to the top. For example, turn the vibrator and run it at a low speed for 2-3 minutes to flush out the coal, clean the oil and clean for cleaning. Then add new lubricant and mark the grease on the oil surface.
How to choose a walk behind road roller according to the environment I have sorted these out, and I hope it will be helpful to you.
Previous: The Importance Of Agricultural Spraying Uav To Agricultural Development