The types of roads are different, and the types of road rollers used are also different. The following is a professional manufacturer of vibratory rollers to introduce you how to choose: First, for the first and second national trunk roads and special roads for automobiles, you should use Large vibratory roller with high compaction capacity. Then, for highways below grade three, or when the compaction work is not often carried out, it is equipped with a mobile flexible vibration roller of about 2 tons. Again, for asphalt concrete pavement, a full-drive vibratory roller should be used. In addition, for cement concrete pavement, a tire-driven series vibratory roller can be used. For the bottom layer of the roadbed, choose a tire roller or tire-driven vibratory roller for compaction to obtain a uniform density. When repairing the road surface, a static-acting light roller can be used.

The basic configuration of the walk behind road roller is mainly the engine, hydraulic system, steel ring, exciter and operating handle, and the engine is a diesel engine and a gasoline engine. At present, small rollers in China can be divided into three types: walk-behind single-wheel rollers, walk-behind double-wheel rollers, and seat-mounted rollers. The walking of the road roller appeared earlier in the 1980s in the United Kingdom. At that time, the structure and operation were very simple, and the development has been gradually improved, and the production technology has been greatly improved.

If you need to use a roller, I hope that the above introduction will allow you to choose a suitable walk behind road roller to work.