What Happens When The Mortar Spraying Machine Is Shot Without Pressure
The mortar spraying machine has high spraying efficiency during construction, and it is a tool for quickly mortar spraying machine in the paint industry at present. I don't know how to deal with it, which delays the construction period.
The construction principle of the mortar spraying machine is high-pressure atomization. If the spray gun fails to spray the paint during construction, it will make people very angry. What is going on after the gun is sprayed? If the first shot is weak, but the pressure in the pressure gauge is always full. There may be the following situations:
There are impurities or too sticky in the paint, the mortar spraying machine can not spray.
Countermeasure: Filter the paint in advance. If it is too sticky, add more water or thinner to dilute it. Of course, it is too thick or too sticky.
The spray gun is blocked.
Countermeasures: cleaning (spraying water), cleaning up foreign objects
What Happens When The Mortar Spraying Machine Is Shot Without Pressure?
If the pressure in the pressure gauge disappears after the first shot, it means there is a blockage inside the machine. For example, the suction pipe (valve), the inside of the pump body, etc.
Countermeasures: cleaning (spraying water), cleaning up foreign objects.
Mortar spraying machine is normal. We will not often fail during construction, but the machine also has some construction matters that need to be paid attention to before construction. If you want to ensure that the machine can be used normally, you need to understand these construction matters.