The railway buffer stopper is mainly used for the safety protection equipment of the anti-collision car on the railway end line. The buffer head and the coupler are in contact with the buffer rubber plate to bear the impact of the slippery vehicle coupler, forcing the slippery vehicle to stop. It is welded with heavy-duty angle steel, without bolt connection, and has the characteristics of strong bearing capacity and stable gravity. In order to reduce the sudden situation during use, regular maintenance of the railway buffer stopper is required. The specific repairs are as follows:

Repair Of Railway Buffer Stopper

Maintenance of railway buffer stopper:

1. The railway buffer stopper should be restored to its original position in time after being hit. The wedge iron can be taken out first, the main frame and the booster can be pushed back to the original position, and then re-tightened and pressurized according to the above method.

2. Keep the buffer stopper in good working condition, and check it in sequence every month to confirm whether there is displacement, deformation and loose screws, and handle it when there is abnormality.

3. Care should be taken to clear the obstacles on the rail surface of the buffer stopper in the sliding direction, and handle super-high road studs and sleeper bolts.

4. Apply anti-rust paint to the buffer stopper every two years.

Doing the above maintenance work in advance can prevent accidents and failures, reduce sudden hazards, and ensure the safety of railway transportation. Have you learned it? Please feel free to contact us for more professional knowledge about railway buffer stoppers! !