When we buy a product, we need to use it for a long time, so how to increase the service life of the product is very important to us. As a transport equipment, the charging machine is an important component of the electric stack truck. How can we make the charging machine of DB15 electric stack truck live a long time?

How to extend the service life of DB15 electric stack car charger?

1. Clean the charger with a dry cloth or anti-static cloth; Do not use chemical or abrasive cleaners to avoid damage to the housing; Protection from severe shock or exposure to high temperatures and humidity;   

2. When the ac input voltage is 110 v, the input current is 10.8 a. When the ac input voltage is 220 volts, the input current is 5.4 amperes. When two rectifier tubes work at the same time, the output current can be up to 12 amps; when one rectifier tube works alone, the output current can not exceed 6 amps. Appropriate fuses should be selected for input and output currents. The brush of the transformer sliding contact should be kept in good contact. When the part of the brush exposed to the copper frame is less than 2mm, it should be replaced in time.  

3. DB15 electric stack car charger shall not be dismantled and decomposed without authorization; The charger should be placed vertically in a dry and ventilated environment to avoid dampness and keep away from inflammable and explosive products. When the battery is full, first disconnect the input ac power supply, and then disconnect the connection between the charger and the battery.  

4. Disconnect the ac power supply under the condition that no one or the DB15 electric stacking truck is used for a long time; Place it in a dry and ventilated place indoors and cover it with the hood. Do not cover the charger during charging. The ambient temperature should not be more than 40℃. DB15 electric stack car charger is limited to indoor use, beware of rain; Do not charge non-rechargeable batteries; The charger should always be kept clean to prevent dust and moisture from invading.  

5, after a period of time, the DB15 electric stack car should also add power to tide. During the charging process, the ventilation blinds on the housing cannot be shielded to ensure that the heat generated in the charger diffuses in time. After the fuse in the input and output circuit is blown, it must be replaced according to the required specification. Fuses should not be too thick and wires should never be used instead.  

Above is the method to make DB15 electric stack car charger longevity, I hope to help you, so that you can more correctly operate DB15 electric stack car.